管螺纹表示方法(国外英文资料).docVIP

管螺纹表示方法(国外英文资料) The pipe thread representation method One, the inch Thread (Thread Angle of 55 degrees) Thread of British standard (Thread pitch shape Angle 55 °) BSW - British Standard Whitworth Thread (Coarse) BSF - British Standard Whitworth Thread (Fine) G - Straight pipe threads (external threads of A, B, G, g-d), Straight pipe thread (Outside) Thread in A \ B: its in G, G - D. R -- the outer paper pipe thread (Old thread code ZG, KG) RC - Inside taper pipe thread (Old thread code ZG, KG) Type 2, American Thread (Thread Angle of 60 degrees) Thread of American standard (Thread pitch shape Angle 60 °) UNC -- the Unified coarse thread (Instead of NC) UNF -- (Instead of NF) Unified fine pitch thread (Instead of NF) UNEF -- Unified superfine pitch thread UN - - the Unified thread of the Unified thread UNS -- the Unified Special thread of the Unified thread NPT -- the common use of the Taper pipe thread for general purpose The thread code Z, K) NPSC - Internal straight pipe thread for connection NPSM - the device is free to cooperate, and the mechanical connection is Straight pipe thread for general purpose NPTF - dry sealing taper pipe thread Dryseal taper pipe thread NPSF - dry seal fuel straight pipe thread Dryseal straight pipe internal thread NGT - Special thread for gas cylinders for cylinders 3, Metric thread Metric thread ZM - - Metric taper pipe thread, Metric taper pipe thread Other threads Other threads SM: Thread for sewing machine PZ - Special thread for gas cylinders for cylinders 5V1-20V1 - gas door core thread 5V1-20V1 - Tyre valve thread Example: Explanation of thread code.e. g. A quarter - 20 unc 1/4-1/4 nominal Twenty - twenty teeth per inch The unc-american standard, the unified coarse thread pitch thread (American standard) Spiral knot One. Threaded joins The performance level of bolts and bolts, mechanical properties and materials gb3098.1-82 Performance rating was 3.6 4.6, 4.8, 5.6, 5.8, 6.8 8.8 8.8, 9.8 9.8, 10.9, 12.9 Materials and heat trea