RS232C标准9针串口接线方法（国外英文资料）.doc

RS232C标准9针串口接线方法（国外英文资料） (second edition) Inspection instrument and microcomputer is the main standard RS232C interface on the communication, and the serial port connection method also to have certain standards, talk about several kinds of commonly used serial connection here, only for reference: One, standard connection 9 to 9 (including 9 for 9, 9 for 9, 9 for 9) : Note: the following hole, needle is the serial port at the end of the serial line, but 2 or 3 May not be exchanged 2 -- -- -- -- -3 3 -- -- -- -- -- -- -- -2 4 -- -- -- -- -- -- -- -- 6 5 -- -- -- -- -5 6 -- -- -- -4 7 -- -- -- -- -- - 8 8 -- -- -- -- -7 9 to 25 (including 9 holes for 25 holes, 9 holes for 25) 2 -- -3 (note: 2, 3 might not be exchanged) 3 -- -- -- -- -- -- -- -2 4 -- -- -- -- -- -- -- -- 6 5 -- -- -- -- -7 6 -- -- -- -- -- -- -- -- -- 20 7 -- -- -- -5 8 -- -- -- -- -- -4 Special connection Non-standard about serial interfaces typically take reference instrument instruction or consulting instrument manufacturer to receive, the following list of several common special connection (the serial port of each device specific connection can reference the LIS division instrument Settings document library) : 9 holes for 9 stitches (H100 urine analyzer) 2 -- -- -- -- -- -- -- -- -- -- -- -2 5 -- -- -- -- -5 9 hole (4-channel semi-automatic blood coagulator) Nine holes for nine holes, one by one, all of them. 3, 9 to 25 (C100 urine analyzer) 2 -- -- -- -- -- -- -- -- -- -- -- -2 3 -- -- -- -- -- -3 Its going to be -- -- -- -- -7 In the cross, four and five short, six and twenty, Between the 25 and 9 strings, one thread is also welded to the iron sheet at the end. 4, 9 hole to line interface (MEDICA EasyBloodGas blood gas analyzer for telephone line) One end of the line: the end of the line, the metal plate facing itself from left to right is one, two, three, four, five Telephone line -9 hole serial port 1 -- -- -- -- -5 2 -- -- -- -- -- -8 3 -- -- -- -- -- -- -- -2 4 -- -- -- -- -7 Its going to be -