HP v11.23下完全清除硬盘残留的分区信息（国外英文资料）.doc

HP v11.23下完全清除硬盘残留的分区信息（国外英文资料） HP v11.23 completely removes the partition information from the disk As shown below, HP 11.23 operating system, a mirror after the break-up, / dev/DSK/c5t0d0 disk (the original system image plate) still leaves and system disk/dev/DSK/c0t6d0 the same partition information: # ioscan - as fnC disk Class I H/W Path Driver S/W State H/W Type Description = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Disk 1 2/0/0/2/0.6.0 sdisk CLAIMED DEVICE /dev/dsk/DSK/c0t6d0/dev/dsk/DSK/c0t6d0s2 / c0t6d0s2 / c0t6d0s2 / dev/RDSK/c0t6d0s2 / dev/DSK/c0t6d0s1 /dev/dsk/c0t6d0s1 / c0t6dsk/c0t6d0s1 / c0t6dsk/c0t6d0s3 / c0t6d0s1 / c0t6d0s1 Disk 3 2/0/1/0/1/0/4/1.0.0 sdisk CLAIMED DEVICE / dev/DSK/DSK/c5t0d0 / dev/DSK/c5t0d0s2 /dev/rdsk/c5t0d0d0 / dev/RDSK/c5t0d0s2 /dev/dsk/DSK/c5t0s1 / dev/DSK/c5t0d0d0d0s3 / c5t0d0s1 / c5t0d0s1 / c5t0d0s1 / c5t0d0s1 / c5t0d0s1 / c5t0d0s1 / c5t0dsk/c5t0d0d0s3 / c5t0d0s1 / c5t0d0s1 / c5t0dsk/c5 Only by using the pvcre-f/dev/RDSK/c5t0d0 to format the disk, you can only empty the data in the disk, but the partition information remains: # pvcreate - f/dev/RDSK/c5t0d0 Physical volume / dev/RDSK/c5t0d0 has been successfully created. # ioscan - as fnC disk Disk 3 2/0/1/0/1/0/4/1.0.0 sdisk CLAIMED DEVICE / dev/DSK/DSK/c5t0d0 / dev/DSK/c5t0d0s2 /dev/rdsk/c5t0d0d0 / dev/RDSK/c5t0d0s2 /dev/dsk/DSK/c5t0s1 / dev/DSK/c5t0d0d0d0s3 / c5t0d0s1 / c5t0d0s1 / c5t0d0s1 / c5t0d0s1 / c5t0d0s1 / c5t0d0s1 / c5t0dsk/c5t0d0d0s3 / c5t0d0s1 / c5t0d0s1 / c5t0dsk/c5 Heres how to clear the partition information: 1, # idisk - R/dev/RDSK/c5t0d0 Idisk version: 1.32 WARNING, * * * * * * * * If you continue you will destroy all partition data on this disk. Do you wish to continue (yes/no)? yes 2, # RMSF - H 2/0/12/1/0/4/1.0.0 3, ioscan - as fnC disk Class I H/W Path Driver S/W State H/W Type Description = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =