译码器系列（国外英文资料）.doc

译码器系列（国外英文资料） The 74 series integrated circuits are broadly grouped into six categories: 74 times (standard); 74LS x (low-power schottky); 74S (schottky); 74ALS (advanced low-power schottky); 74AS (advanced schottky); 74F times x. In recent years, there have been 74 series of high-speed CMOS circuits, which fall into three categories: HC works for COMS; HCT works for TTL, which can be used in a series of 74LS. HCU is suitable for non-buffered CMOS circuits. These nine 74 series of products, as long as they are the same number in the back, have the same logic and the arrangement of the pins. According to different conditions and requirements, different types of 74 products can be selected Is high frequency, low voltage, high current schottky diode characteristics different from the common diode, it is widely used in switching power supply, frequency converter, drive circuit, high frequency, low voltage, high current rectifier, stream, protection diode is used The reward is too little, more 7400 TTL 2 input end 4 and non-gate 7401 TTL collector open 2 input end 4 and non-gate 7402 TTL 2 enters end 4 or non-gate 7403 TTL collector open 2 input end 4 and non-gate 7404 TTL 6 inverter 7405 TTL collector opens the six inverter The 7406 TTL collector opens six anti-phase high-voltage drives The 7407 TTL collector opens six positive and high voltage drives 7408 TTL 2 enters end four and gate 7409 TTL collector open 2 input end 4 and gate 7410 TTL 3 input 3 and non-gate 74107 TTL tape clears the master from the double j-k trigger 74109 TTL tape preset removal is triggering the double j-k trigger 7411 TTL 3 enters end 3 and gate 74112 TTL tape preset clear negative trigger double j-k trigger 7412 TTL opens the three input terminals three and the non-gate 74121 TTL monostable multivibrator 74122 TTL can trigger a single stable multivibrator 74123 TTL double can trigger a single stable multivibrator 74125 TTL 3-state output high efficient four-bus buffered door 74126 TTL 3-state