宽带出现错误代码（国外英文资料）.doc

宽带出现错误代码（国外英文资料） Error 691, usually stolen number. The solution is only to contact netcom. Error 692, modem hardware failure. May be the modem did not open, please check your modem is already open, or the modem driver reinstall it again. When dialing a number of error codes such as 691, 678, etc. Error 602 problem: dial-up network or are using due to installation error, cant connect the reason: RasPPPoE not fully and correct installation solution: any PPPoE software uninstall clean and reinstall Error 605 problem: dial-up network due to equipment installation errors cannot be used to set port: RasPPPoE not fully and correct installation solution: any PPPoE software uninstall clean and reinstall Error 606 problem: dial-up network port reason: unable to connect the required equipment RasPPPoE not fully and correct installation, cable fault, ADSLMODEM troubleshooting: uninstall clean any PPPoE software, reinstall, check the network cable and ADSLMODEM Error 608: the device that dial-up network connection does not exist: RasPPPoE does not have complete and proper installation solution: uninstall any PPPoE software and reinstall it Error problem: dial-up network connection device of the type cannot be determined: RasPPPoE not fully and correct installation solution: any PPPoE software uninstall clean and reinstall Error problem: dial-up network routing is not correct: RasPPPoE not fully and correct installation, ISP server troubleshooting: uninstall clean any PPPoE software, reinstall, contact your ISP Error 617 problem: dial-up network connection device has been disconnected reasons: RasPPPoE not fully and correct installation, ISP server failure, cables, ADSLMODEM troubleshooting: uninstall clean any PPPoE software, reinstall, call your ISP inquiry, checked and ADSLMODEM Error 619: unable to connect to the specified server, the port used for this connection is closed. Problem: because the last connection error occurred, and the interval time was too short, the server