塑胶模具常用钢材(国外英语资料).docVIP

塑胶模具常用钢材(国外英文资料) [share] plastic mould steel is commonly used in (a) C45 W carbon steel 45 # carbon steel or steel in Hong Kong called ace steel, the hardness of the steel is: HB170 ~ HB220, cheap, easy processing, on the mold used for die set, needle, and some important parts, standard mould frame on the market is to adopt this kind of steel; (2) 40 CrMn Mo 7 hard plastic die steel This kind of steel is hard steel, generally not appropriate heat treatment, but can nitriding treatment, hardness of the steel grade difference is very big also, HRC from 280 to 280, depending on the standard between the steel mills, as has a hard processing, mechanical cutting is not too difficult, so it is appropriate to do some lower price mould insert, some in the production of large quantities of mold die set also USES the steel (some customers specified shall be of the steel formwork), benefit is higher than carbon steel in hardness, deformation than the stable carbon steel, steel P20 have this is widely used in plastic mould, so many brands, including common brand in south China region are: the brand ASSAB one win. (3) X 40 CrMo V51 is made of steel that is made of steel: HB185 ~ HB230 must be treated with heat treatment. Used in plastic mold hardness is generally 480 ~ 520 HRC, can also be nitriding treatment, because of the need to heat treatment, machining is difficult, so on the mould price is more expensive, if need to heat treatment to more than 40 HRC hardness, mould generally by machining is difficult, so before heat treatment must first work pieces of rough machining, by its is: the hole, the screw hole, and tapping to heat treatment must be done well, or youll annealing redo, so is time-consuming crash, this kind of steel is also common to use on the plastic mould, commonly used brand is: one win best (ASSAB); DE sheng (THYSSEN). (4) X45 Ni Cr Mo cold as steel This kind of steel factory HB260 hardness, heat treatment is required, commonly used for 500-540 HRC hardness,