精铸件的防缩工艺措施实例(国外英语资料).doc

精铸件的防缩工艺措施实例(国外英文资料) Abstract: through examples this paper such as subsidies, such as temperature gradient, filling the basic principles of casting used in revestment precision casting, in the process design by computer numerical simulation platform, combined with the feature of material properties and casting, comprehensive adjustment process characteristics, reducing the amount of mouth watering (risk), in order to achieve better economic benefit. The temperature gradient is used by the heat accumulation factor of the closed key words Revestment precision casting than other casting difference mainly red shell casting (1050 ℃) conditions. It brings a good filling ability make the casting surface is smooth, but for the casting of the feeding also brings many problems, such as: the heat solidification at the same time section of the scattered and isolated hot feeding; Transfer the shrinkage cavity and the distance to the feeding system after the feeding riser of a large number of calculations [1] series of technological measures, such as due to structure change, the thickness of the shell mould castings and the suitable refractory material is different, at present most of the processing or from experience. Due to the small investment castings, general conditions gate and riser of gating system, at the same time or shell making, by means of changing process, make the limited mouth watering (take) the dosage of the comprehensive problem solving, and the less the better is the point of this paper. subsidy The subsidy is an expansion Angle that is open to the opening of the mouth, ensuring that there is a supplementary channel between the mouth and the resection. Figure 1 seat is an example of application subsidy, with a quality of 2.62 Kg. By known as shown in figure 1 and figure 2 hot section area, such as the arrow position can be set to the side horse mouth watering (take), the problem is inconvenient to grind the gate more than at the same time, due to the limited p