鲁大师教(国外英文资料).docVIP

鲁大师教(国外英文资料) Teach you how to modify the display properties After the system is installed, you should install the necessary drivers, such as graphics cards, sound cards and motherboards. To display the best effects, you should set the display properties of the system. Modify the display properties as follows: (1) click the right mouse button on the desktop, and click properties in the pop-up menu. (2) in the dialog box shown in the figure, click the Settings tab to change the screen resolution to the size of the monitors actual screen, such as a 17 inch display for 1024 * 768. (3) in the dialog box shown in the picture, click the advanced button, enter the monitor option, modify the display properties, change the screen refresh frequency to the highest, generally 85 hertz. If your computer screen sees jitter, that is, the refresh rate is too low. Change the display properties in the way above, and set the refresh rate above 85 Hz Memory BIOS optimization settings Time: 2010-08-20 14:44 source: Lu master download Author: Hardware testing print Hardware inspection (/help/hardsummary.htm) Now, although the increase in memory capacity, but sometimes we still feel very nervous system resources available, this is because the Windows memory management by default, if you want to further develop the performance of large memory capacity and improve the stability of the system, we should take some necessary measures to optimize. Below, the author according to his own use of experience, talk about how to optimize the settings in BIOS. 1.SDRAM Timing: memory access time setting Typically, during the boot process, the BIOS that supports SPD automatically reads the information in the memory SPD chip and sets the memory access time in accordance with the default values in the SPD. However, now most motherboards provide a custom memory function parameters, in order to maximize the performance of memory, you can BIOS the memory parameters are set manually, the method is: enter the BI