机械设计基本知识.TXT(国外英文资料).docVIP

机械设计基本知识.TXT(国外英文资料) Basic knowledge of mechanical design. TXT 1: how does the handle of the drill work? Answer: the torque and axial force required to hold and pass the hole. 2: what is the effect of the flat tail in the taper shank drill? Answer: to increase the torque of transmission, avoid drill in the main shaft or drill. 3: how does the orientation part of the drill work? A: it keeps the drill of the drill bit in the direction of the cutting process. It also has the function of repairing the aperture wall and the spare part of the cutting part. 4: what are the bad things that happen when you drill through the hole? Answer: when just drill bit wear workpiece suddenly decreases, and the axial resistance due to drill into the mechanical gap and elastic deformation of sudden, will make the drill bit to big feeding automatically, So that the bit is broken or the drilling quality is reduced. 5: what is the effect of cutting fluid when drilling? Answer: reduce friction, reduce the drill resistance and cutting temperature, improve the cutting ability of the drill and the surface quality of the hole wall. 6: what is the amount of cutting? A: it is the total amount of cutting speed and depth of cutting. 7: what is the grinding? A: it is the method of grinding the surface of the workpiece by grinding wheel. 8: what is unfolding? Answer: the process of spreading the surface of a metal structure or local in the shape of its actual shape is called expansion. 9: how many ways can you draw a diagram? A: there are parallel lines, triangles, and radiation. What is the development condition of parallel line? A: the surface of the component is parallel to each other and reflects the real length on the projector. 11: what does plate processing include? Answer: determine the neutral layer of bent piece and eliminate plank thick interference. 2: what factors are involved in the changes in the thickness of the plate? Answer: it is related to the bending radius of the plank and the th