机械制造技术(国外英文资料).docVIP

机械制造技术(国外英文资料) Chapter 1 introduction of mechanical manufacturing system and manufacturing technology : 1. The manufacturing system and manufacturing processes involved in the hardware, software and personnel of a manufacturing resources into products of organism, known as the manufacturing system. The manufacturing system is always accompanied by movement of material flow, information flow and energy flow. Manufacturing process consists of technical preparation, blank fabrication, mechanical processing, heat treatment, assembly, quality inspection, transportation, storage and so on. Manufacturing process: technical preparation, mechanical processing, heat treatment, assembly, etc. Are commonly referred to as manufacturing process. Mechanical processing consists of several processes. Each process of machine processing can be divided into installation, location, stage, walking knife and so on. The process of a workers process of continuous completion of an artifact in a working place. Installation: in one process, the workpiece is located and tightened once in the machine tool or fixture and is called an installation. 9. Location: in the workpiece installation, make through dividing device relative to the workpiece machine tool lathe bed change the machining position each occupy a position called a workstation. Step 1: in one process, the finished processing of the surface, cutting tool, cutting speed and quantity of feed is called the step. Walking knife: cutting tool is machined on the surface of the machined surface once. There are three types of production according to the degree of specialization of production: single production, batch production, mass production. Batch production, batch production, mass production. The method of mechanical processing is divided into the material forming method, the material to divide the method, the material accumulative method. The material forming method is a process method that transforms the amorphous raw material into a pr