浅谈柔版印刷制版技巧(国外英语资料).docVIP

浅谈柔版印刷制版技术 Discussion on plate making technology of Flexography Printing technology, from traditional analog printing to digital printing, flexo printing is no exception. With the development of flexo printing technology, flexible plate making technology is also transformed from analog to digital. In the days before the Asian International Exhibition on the label, Esko booth eye-catching CDI attracted the attention of many people. Today, most of the printing market in offset printing, almost everyone knows CTP (Computer to Plate), then what is CDI? CDI full text is Cyrel Digital Imager, that is flexible digital direct plate machine. We can understand the difference between the flexible digital direct plate process and the traditional plate making process through the process flow diagram provided by the esmolol. Traditional flexo plate making technology: Process flow: (usually using photosensitive resin plate) 1) back exposure: through a short exposure to establish the floating foundation of the printing plate; 2) the main exposure: the main exposure with the original film, the negative picture on the residence to the plate, resin plate is UV light light polymerization and curing; 3) rinse: remove the unexposed resin and form a printing float; 4) drying: hot air drying, remove the solvent absorbed in the plate, restore the original thickness of the plate; 5) to glue: to remove the surface viscosity of the plate; 6) after exposure: to make the printing plate a complete polymerization, so that the overall hardening of the page, to achieve the required hardness. Digital direct plate technology: The process is briefly described as a process: 1) imaging: the plate is placed in CDI (Cyrel, Digital, Imager) and transferred to the plate by laser; 2) the main exposure: after laser imaging plates from the CDI removed, placed in the traditional exposure machine for main exposure; the same with the traditional plate technology, digital technology also need to complete plate was