中英文2x3l实验室发酵罐.docVIP

2X3L小试实验发酵罐(GS8100-2X3L/S) The experiment of fermentation tank 设备范围Equipment range 系统组成名称System component name 规格型号 Specification model 数量 Number 罐体Tank 2X3L (轴系) Shafting 2台 2 Taiwan 电机Motor 0.15KW/0-1000 2台套 2 sets 内封Sealed GDFD16 2套 2Set 机封Sealing machine 204/D16 2件套 2 sets 隔膜阀Diaphragm valve DN8 8件套 8 sets 截止阀Globe valve DN10 4件套 4sets 球阀ball check;?ball valve DN10 6件套 6sets 电磁阀 Solenoid valve DN6 2件套 2sets 加热箱 Heating box D60 2件套 2sets 管件Pipe fitting DN8/DN12 20kg 连接配件Connecting fittings 管路支撑/手拷夹/螺丝螺母/密封件 Pipe support / clamp / screw / nut handcuffs seal 18件套 18sets 温度探头Temperature probe PT100 2套件 2sets 一、配置参数Configuration parameters 技术参数、指标及要求Technical parameters, indicators and requirements 罐体系统 tank system 全容量：3L，工作容量： 70% 罐体是耐高温SUS316L+304不锈钢材质+硅硼玻璃组成，所有部件设计在罐盖上，专业的灭菌管路，便于清洗，罐内无死角，罐底,罐盖镜面抛光，光洁度Ra0.4μm,高径比：2.25:1 。 罐体有pH、DO、温度、消泡、液位电极接口，及备用接口；投料口，能清楚观察物料情况。夹套材质304不锈钢，覆盖率70%，确保控温精度 Capacity: 7L, work capacity: 70% of the tank body is resistant to high temperature SUS316L+304 stainless steel material + borosilicate glass composition, design of all components in the tank cover, professional pipeline sterilization, easy to clean, tank without dead angle, the bottom of the tank, the tank cover mirror polishing, finish Ra0.4 μ m and ratio of height to diameter: 2.25:1. PH, DO, temperature, water consumption, liquid level electrode interface, and standby interface, feeding and discharging port, can clearly observe the material situation. Jacket material 304 stainless steel, the coverage of 70%, to ensure the accuracy of temperature control 2、*灭菌方式：在位蒸汽程序高温灭菌(配灭菌罩) Sterilization method: high temperature sterilization (sterilization) in place of steam 3、搅拌系统Mixing system *采用上部驱动无顶针搅拌技术，与罐底不接触,（博格曼机械密封），转速稳定；发酵专用标准配置桨共三层，桨片高度可调，亦可根据发酵工艺的特殊要求更换不同类型的搅拌桨。0.15KW伺服电机，无级调速(山肯调速器)，搅拌轴系统采用特殊进口锻造316L材料，转速范围：50-1000rpm ±1转。 The upper drive without thimble stirring, not contact with the bottom of the tank