桂林电子科技大学_机械专业英语_作业及复习.pptVIP

* A relationship between temperature and speed of crystal is observed. * The calculated results agree well with the experimental analysis. * It is concluded that this new method can be used in engineering design. * Workers put the finished products in line with each other from small to big, and smaller one is on the left of bigger one. * 要让一个物体获得比光速还快的速度是完全不可能的。 * A is over B, or A is above B, or B is below A, or we also can say that B is under A. * 要让一个物体获得比光速还快的速度是完全不可能的。 课堂小练习11 观察了温度与结晶速度之间的关系。 A relationship between temperature and speed of crystal is observed. 观察了力与速度之间的关系。 A relationship between the force and speed is observed. 复习11 The deviation误差 in each method is carefully estimated. 仔细的估计了每种方法的误差。 仔细的估计了试验中所有可能碰到的困难。 All possible difficulties in the experiment are carefully estimated. 复习11 A lathe holds the work piece and rotates it, and the sharpened edge of a tool cuts and removes material. 车床夹持工件并使它旋转，而锋利的刀具则切除材料。 Some applications of a lathe include the production of shafts, and thread cutting螺纹切削. The chuck卡盘 on headstock床头 hold one end of a workpiece, and the drive mechanism传动机构 spins it rapidly about its centerline. 车床的应用包括轴的加工和螺纹切削。床头箱上的卡盘夹住圆柱形毛坯的一端，传动机构使之快速地绕中心线旋转。 课堂小练习12 所计算的结果与实验分析符合得很好。 The calculated results agree well with the experimental analysis. 所计算的机动性与实验分析符合得很好。 The calculated motilities agree well with the experimental analysis. 课堂小练习12 结论是：这种新方法可应用于工程设计中。 It is concluded that this new method can be used in engineering design. 结论是: 加入某些元素可改变材料的性能。 It is concluded that adding some elements can change the performance of the material. 结果表明理论分析与实验数据一致。 Result shows that结论表明 theoretical analysis is agree with与..一致 the experimental data. 8. Cobalt (钴) is next to, or adjacent to毗邻的 , nickel (镍). 9. Manganese (锰) is in line with符合，与..一致 copper (铜) and gold (金) is in line with hafnium (铪). 10. Yttrium (钇) is near tantalum (钽) but far from zinc (锌). 课堂小练习13 工人把成品从小到大放成一排，较小的放在较大的左边。 Workers put the finished produ