德国FAG轴承型号说明（国外英文资料）.doc

德国FAG轴承型号说明 Germany FAG bearings (2008-06-20 09:31:38) model description tags: on Classification: reprint FAG companys bearing code consists of basic code, prefix code and post code. The basic code indicates the basic type, structure and dimensions of the bearings. The prefix indicates that the bearing parts are placed before the basic code. The post code refers to the supplementary code added to the bearing basic code when the bearing structure, shape, size, seal, cage, tolerance, clearance, heat treatment, packaging, technical requirements, etc. are changed. 1 prefix The prefix code R is placed directly before the basic code of the bearing, and the other prefix codes are separated from the basic code by a small dot. GS thrust cylindrical roller bearing race. Example: GS.81112 K - - a combination of the scroll and cage. Example: combination of thrust cylindrical roller and cage K.81108. R - bearings without separable inner or outer rings. Example: RNU207- without NU207 bearing with inner ring. WS - thrust cylindrical roller bearings. Example: WS.81112. 2 post code The post code is placed behind the basic code. When there are many sets of post codes, they should be arranged from left to right in the order of the following code names in the bearing code table. Some post codes are separated from the basic code by small dots. (1) internal structure Internal structure changes of A, B, C, D and E Example 1: angular contact ball bearings 7205C, 7205E, 7205B, C-15 degrees contact angle, E-25 degree contact angle, B-40 degree contact angle. Example 2: cylindrical roller, spherical roller and thrust roller bearings N309E, 21309E, 29412E- type design to strengthen, improve the bearing load capacity. Full complement cylindrical roller bearing VH- roller self-locking (standard bearing roller round diameter different from the same model). Example: NJ2312VH (2) the shape, size and external structure of the bearing DA- separable double row angular contact ball bearing with double