管子技术1.pptVIP

* * * * * * * * * * * Seite * Products Structure / Material Plastic pipes are extruded from the especially flexible and durable basic material of polybutylene. The material is melted, shaped and then cooled. The adhesive between basic pipe and barrier layer allows force-fit and permanent jointing. Single-layer pipes without oxygen barrier are used for drinking water installations and in industrial applications. The pipes are jointed either by welding or with push-in connectors. For drinking water material PB 4237 grey is used. Multilayer pipes are installed in heating systems. The material used here is the quality Akoafloor nature. Seite * Products Dimensions ? 6 mm to 110 mm Special dimensions and special tolerances on request Applications Surface heating and cooling (floor, wall, ceiling) Radiator connection Drinking water installation Industrial applications Seite * Products Approvals / Standards DVGW (German Technical and Scientific Association for Gas and Water) approval: DW-8321AL2001, DW-8326AP2015 CSTB approval: CSTBat – 167-988 SKZ monitored (SKZ symbol A161) Properties in accordance with DIN 16868 / 16869 and EN ISO 15876-2 Oxygen tight layer, flexible and scratch resistant Plastic layer for force-fit connection Seite * Products Advantages Oxygen-tightness (multilayer pipes) in accordance with DIN 4726. Coating the pipes with an EVOH layer achieves a high barrier effect. Operational range max. 95 °C, max. 10 bar, constant temperature 70 °C. Pipes made of PB are corrosion free. A reaction of the materials and their alteration can be excluded. Weldable Seite * Products Advantages Excellent stress crack resistance Very flexible, tight bending radius and easy to lay (also cold laying) No incrustation due to smooth inner pipe surface. Low linear thermal expansion Resistance to thermal and mechanical loading Seite * Products Pipe in corrugated pipe The pipe is drawn into a corrugated pipe at the factory. This protec