轮机英语大证考试模拟题(二).doc

轮机英语大证模拟试题(二) Generally the symbol (GB786.1-93) of pressure reducing valve is ____. 一般的符号（GB786.1-93）的减压阀是 A. B. C. D. What should be cared before any inspection or maintenance is undertaken on the A.C. equipment? AC设备上进行任何检查或维修之前，应关心什么？ A. Prevent equipment from corrosion B. Ensure high voltage of equipment C. Ensure isolation of equipment确保设备绝缘 D. Prevent equipment from sewage 3. When started, a complete oily water separating unit is first filled ____. The oily water mixture is then pumped through the inlet pipe into the coarse separating compartment. 一个完整的含油污水分离装置启动时，首先充满洁净的水。油状的水混合物中，然后通过入口管泵送分成粗分离室 A. with dirty water B. with clean water C. by mixed water D. by oily water 4. When the union purchase derrick is operated, one derrick is positioned over the quayside and the other almost vertically over the ____.当联合采购井架操作，定位在码头边的一个井架和其他几乎垂直的货舱 A. cargo hold B. dock C. machinery space D. pedestal 5. If the main engine starting consecutively failed ____ times, it should be found the cause before next starting. 如果主发动机的起动连续3次失败，它应符合的原因下一个开始之前 A.5 B.2 C.3 D.4 6. A centrifugal pump gradually develops insufficient discharge pressure. What corrective action is required? 离心泵逐渐发展不足的排气压力。有什么需要采取纠正措施？ A. Replace the wearing ring, shaft, and impeller. B. Throttle in on the suction valve. C. Throttle in on the discharge valve. D. Replace the wearing rings. 更换戴戒指。 7. The bearing shell generally has _tags___ for location and oil grooves round the center of its axial length. A. tags B. tips C. keys D. lips轴承壳通常具有标签其轴向长度的圆的中心位置和油槽。 8. Normally, in sufficient air results in the formation of black smoke which is accompanied by a tendency for the boiler to_____ or flutter. 通常情况下，在充足的空气的结果，这是伴随着锅炉搏动或扑动的倾向黑烟形成。 A. red color flame B. pulsate C. orange flame D. dark flame 9.Whether using a centrifuge or a simple filter, oil cleaning and filtration will be the most effective w