面向3D打印复合工艺的生物CADCAM系统及试验研究.pdfVIP

Vo 1. 50 NO.15 第 50 卷第 15 期 机械工程学报 2014 年 8 月 JOURNAL OF MECHANICAL ENGINEERING Aug. 2014 DOI: 10.3901闭ME.2014.15.147 面向 3D 打印复合工艺的生物 CAD/CAM 系统及试验研究* 刘缓缓张付华陈伟华严飞飞郑璐璐胡庆夕 (上海大学快速制造工程中心 上海 20伺44) 摘要: 3D 打印复合成形工艺将 3D 打印技术与静电纺丝技术相结合，在构建具有多尺度多梯度结构特征的，生物硬组织修 复用再生支架方面表现出独特优势。提出一种针对3D 打印复合成形工艺的生物CAD/CAM 系统构建方法，不仅能实现成形 过程的自动监控，保证多工艺的柔性复合，而且能实现从 STL 模型，到生成加工路径信息，并最终驱动系统硬件进行加工 的自动化处理流程。该系统及方法将生物建模软件与生物 3D 打印复合成形系统有效集成，将 CAD 过程中无法建模的只度 信息与来自 CAD 的加工信息有机结合并处理，有效解决了 3D 打印成形再生支架时，精度受限而无法在支架内部成形微观 尺度结构的问题。最后，通过骨组织工程支架的制备试验验证了系统的有效性。 关键i司: 3D 打印:电纺丝:智能监控:多尺度:梯度 中图分类号: TH16; Q811 CAD/CAM System and Experimental Study of Biological 3D Printing Composite Process LIUYuan严lan ZHANGF由ua CHEN Weihua YAN Feifei ZHENG Lulu HU Qingxi (Rapid Manufacturing Engineering Center, Shanghai University, Shanghai 200444) Abstract: The 3D printing composite forming process combines 3D printing technology with electro spinning technology. The composite forming prωess has obviously advantages in forming regenerative scaffolds with multi-scale and gradient structure which are most important for repairing some damaged tissue. Present a biological CAD/CAM system aiming at 也e 3D printing composite forming process. This system achieves not only the automatic monitoring of the forming process to ensure flexible composition of multi-process but also the automatic processing flow which is 企om STL model to the 世iver files of the processing hardware. Since the proposed system and method integrates the biological modeling so企ware and the biological 3D printing composite forming system，也 multi咽ale information that can be