精雕学习步骤1（Learn step 1）.docVIP

精雕学习步骤1（Learn step 1） Learn step 1 File - input - dot matrix graphics - open - find range - desktop - JD folder type (BMP) - peaches - open Click the image in the image - transform - graph clustering - determine (F6, image maximization) draw - polysemy - spline curve - locking (Decet) Lock the lock - select the object and lock - all unlock save File - save - save as JD folder Select {cross select, click, box choose} {clip, extend, cut} new - chrysanthemum - save Open file - click virtual sculpture (knife) to enter the virtual interface - bar select line - model - new model - determine - model - adjust step length - determine Pictorial - knife - color - single - line fill - seed color (background) - single - line filling (collection state) Sculpture - stamping - color inside (height is carving depth ) Remove line collection - option, graphic mode explicit (shift + n) - color - single - line color (shift + z) color - seed color (shift + x) - material (shift + n) Regional relief (closed line) Draw a polysemy line - stretch line - area extraction - the line of twigs to be made (pink) - generate selection area - determination - stamping - sculpture - regional relief Map - rectangle - only small rectangular - (distance) - - small keyboard input fine-tuning distance direction small rectangular - transform - image - at the same time selected four small rectangular cut - set - informed - area - + - editorial chamfering - fillet Straight grain surface Going to do regional color fill - draws two lost help line (linear) - geometry - Z - input mobile to mobile curve distance - click on the line - a ruled surface geometry - - to replace color - click on the two respectively in Z line after transformation Scanning surface Lets go back to the plane and start with the Z at the bottom of the bottle, then draw a straight line and then draw a semicircle on the line. Click geometry - sweep the surface - track - cross - section (semicircle) - replace color Z-transform (adjusted model) F