中性点接地方式（Neutral ground mode）.docVIP

中性点接地方式（Neutral ground mode） To analyze the update time of the operating mode of the power system Abstract: electric power system with neutral grounding method is a step and power system, many aspects of the comprehensive technical subject, it not only relates to the safety and reliability of the power grid itself, overvoltage insulation level of choice, and to interfere with communication, personal safety. Keywords: power system; neutral 1. Classification of neutral grounding mode of power system There are two types of neutral grounding modes in the power system. One is the neutral grounding or the low impedance grounding, which is called the large earth current system, and the other is The neutral point is not grounded, and it is known as a small earth current system through the arc suppression coil or high impedance grounding. Among them, the electric power is widely used to be neutral ground, and the neutral point has to be grounded in three ways, such as the ground of the arc suppression coil and the direct grounding of the neutral point. 1.1 neutral neutral system Neutral point grounding method, namely the neutral point of insulation, simple structure, convenient operation, without any additional equipment, saving investment, suitable for rural 10 kv overhead line long radiation form or tree form the power supply network. When a phase of neutral point grounding system, pick up on alternating voltage of electric power supply is not destroyed, they can continue to run, but the power grid in a to run for a long time, is not allowed, because at this time the higher breakdown voltage, insulation breakdown, the weak point is likely to be caused by two phase short circuit, will seriously damage the electrical equipment. Therefore, it is necessary to set up a special monitoring device to prevent the operator from timely detection of a fault in the power grid to remove fault parts from the power grid. In the neutral point grounding system, when the grounding capacitive