AWOS 题目20070323(问答题)（AWOS topic 20070323 (qa)）.docVIP

AWOS 题问答题)（AWOS topic(qa)） Try to talk about how it works. Cloud probe is through upward firing a beam of light pulse transmitter, optical pulses from the transmitter, the cloud base after reflection has been detected by the receiver, by measuring the optical signals from the launch to be received to the time required to determine the cloud height. Since the instantaneous intensity of the return signal reflects the atmospheric reflectivity of the corresponding altitude, information about clouds, fog, rain, etc. can be obtained from the return signal. The reflector height H = C * T / 2 (C for the speed of light, T for time) 5 2 What are the main components of the CT12K? Including high voltage rectifier, laser diode, laser diode trigger circuit. 5 one Please draw a block diagram of the CT12K cloud height transmitter. [please refer to the CT12K cloud gaoyi technical manual. 5 2 What are the main components of the CT12K? Receive photoelectric tube, high voltage power supply, filter, i-u conversion preamplifier. 5 one What are the four main parts of the electronic circuit of CT12K cloud high meter processing board CTM12? CPU part, monitor part, sequence control part, amplifier part. 5 one What are the effects of two light-sensitive diodes on the CT12K cloud height monitor board? One to monitor the laser frequency, one to monitor the sky background noise. 5 one What control does the laser pulse of the CT12K cloud high instrument arise from? Produced by the transmitter board CTT12, the potassium arsenide laser diode emits laser pulses under the control of the plate laser trigger signal. 5 2 Test the calibration procedure of CT12K cloud high instrument. In black, the non-reflective cloth completely covers the transmitter window of the cloud height instrument, connected to the portable computer, and connected to the machine under the PCPLUS program. AUTO OFF GAIN 0 LASE ON SEQ ON CAL 244 minutes later, the cloud high meter completes automatic calibration.