CAD知识注意点（Knowledge of CAD）.docVIP

CAD知识注意点（Knowledge of CAD） When the length of the line exceeds the border of CAD, the middle key of the mouse is used to translate invalid. The two keys in the middle of the mouse can be used continuously, so that all the lines can enter the field of vision. 1: press the button in the middle of the mouse twice to indicate all the displayed objects. 2: drag the window from left to right, select box, all to select 3: drag from right to left select, as long as contact with the object can be selected, including the inside can also be selected. 4: decompose primitive shortcut key X 5: the end of spline curve, press 3 this space bar 6 kinds of patterns: custom fitted to the needs of the pattern reproduced on the desktop search - click the CAD attribute -- point target: open the support folder to just copy the pattern pasted on the inside 7: Area shortcut key REG (the line frame with no extra line segments) the border shortcut key BO (Note: the boundary is to extract a surface area or multi segment line on the original basis) 8: stretched shortcut key S (Note: the correct method is to choose from right to left, and part of the object, other alternatives are wrong) 9: clip point edit, click the endpoint, continuous space bar can be converted to stretching, shortening, zooming, stretching, etc. 10: edit multi line pedit edit spline curve edit pattern 11: block: B, write block (create permanent block): W, define attributes: ATT, insert: I, block edit: Bedit. 12: the state of the text of the height: 2.5-3.5 13: name each layer F2 Thick lines (white): visible contour line Fine solid line (green): dimensions, lines, dimensions, lines, sections, leads Wavy line (green): the boundary line at the fracture, the line between the view and the view Dotted line (yellow), line dash:, invisible outline Dot dash (red) line long-dash dot: axis, symmetrical center line Double dot (purple = magenta), line phantom 5X: false appearance, outline, line of interruption Start the recording of the 1