CAD考试（CAD test）.docVIP

CAD考试（CAD test） 1, the fastest way to rerun the last command is to press the ENTER key 2, running AutoCAD2002 software requires at least 64MB of memory space. 3, running AutoCAD2002 software, computer microprocessor, the main frequency should be in (233MHz) above 4, in AutoCAD2004, the system provides () a command to draw arcs. A (A) 11 ( 5, AUTOCAD2004 graphics files and boilerplate extensions are: B (B) DWG, DWT 6. The key to cancel the command execution is: B (B) press the ESC key 7. The menu that is called at the cross cursor is called C (C) shortcut menu 8, when the drop-down menu is lost, which of the following commands can be used to reload the standard menu: D (D) MENU 9. In the command line state, actions that cannot invoke the help function are: B (B) CtrlH shortcuts 10. The abbreviation of the default world coordinate system is (). D (D) WCS 11, to quickly display all the graphics within the limits of the graph, you can use () command. D (D) view | zoom | 12. Set the pinch sizes and colors in the [options] dialog box () tab. D ( (D) choice 13, in AutoCAD2004, will be about two viewports changed into a left and left and right under the three viewport can choose (command). D (D) view | viewport | two viewports 14, in AutoCAD, you can switch back and forth between open graphics, but you cant switch graphics during some longer operations (such as re generating graphics). C (C) Ctrl+F6 key or Ctrl +Tab key 15, enter Zoom on the command line, and execute the [zoom] command. The specified on the command line window corner, input scale factor (nX or nXP), or all [(A) / center point (C) and dynamic range (D) / (E) / a (P) / (S) ratio / window (W)] real-time prompt: (), the graphic input, when compared to the front view is reduced by half. B (B) 0.5x 16 [zoom] (Z00M) command changed () D during execution (D) the size of the graphics displayed in the view 17, when you start the wizard, if you select the use of template options, the extension of each AUTOCAD model