cad知识（Knowledge of cad）.docVIP

cad知识（Knowledge of cad） AutoCADR14 bonus tool The so-called AutoCAD bonus tool (BonusTools), which is hidden in the AutoCADR14 in a group of little-known commands, their role is unique, can help us to quickly complete the drawing work. This set of tools only when installing select installation or optional can be loaded, which is the same as AutoCAD standard tools, there are menu and toolbar and command mode, the only difference is that we call it the menu, you must use the menu command into, or only by executing the command for the way. Here I will introduce the role and use of this set of tools, I hope you can through these tools, in practical work to play twice the result with half the effort. 1. lists external references, blocks, entities: COMMAND:xlist (carriage return) TOOLBAR: Details of external references or blocks can be listed, including objects, colors, layers, lines, and so forth. Most importantly, it does not smash the entity and filter the information about the object contained in it. 2. fast lead: COMMAND:qleader (carriage return) TOOLBAR: Similar to leader command, but more powerful. In addition to using simple dialog box operations, some features are added. For example, lead angle selection. But the insertion of tolerances is missing. Many steps are omitted in the annotation, so as to achieve a quick purpose. 3. trim to block solid: COMMAND:btrim (carriage return) TOOLBAR: When trimming an entity, the tool cuts the edges of the block as a cutting line without breaking the blocks, and cuts the excess lines. (Note: trim command is not available.) 4. extends to block entities: COMMAND:bextend (carriage return) TOOLBAR: The basic principle of this tool is to extend the line to any boundary of the block. 5. senior trim: COMMAND:extrim (carriage return) TOOLBAR: Suppose there is a closed polyline, such as rectangular, there are many entities with staggered, if the need for internal or external rectangular lines for pruning, usually using the trim command