简析电流互感器开路的危害、原因、现象及处理方法和防范措施（Analysis of current transformer open circuit hazards, causes, phenomena, treatment methods and preventive measures）.docVIP

简析电流互感器开路的危害、原因、现象及处理方法和防范措施（Analysis of current transformer open circuit hazards, causes, phenomena, treatment methods and preventive measures） Analysis of current transformer open circuit hazards, causes, phenomena, treatment methods and preventive measures Abstract: in recent years, with the continuous development of power grid and the increase of electrical equipment, the accidents caused by current transformers have also increased, especially the accidents caused by the open circuit of current transformers. The fault and abnormal operation of current transformer will cause maloperation or refusal of protection, so it is very important for field operators to correctly judge the faults of current transformer and deal with it in time. In this paper, the harm, causes, phenomena, treatment methods and preventive measures of current mutual inductance open circuit are briefly analyzed. Key words: current transformer; open circuit; phenomenon; reason; treatment method; preventive measures In order to ensure the safe and economical operation of power system, the operation of power equipment must be monitored and measured. But direct access to measurement and protection device is not generally a high voltage equipment, current transformer is the role of the current of the system into small current scaling, supply measuring and protection device, and two times with high voltage isolation system. I. harm of open circuit of current transformer The primary current of the current transformer is independent of the current of the two load. When the transformer is working normally, because the impedance is very small and close to the short-circuit state, the magnetization force produced by the primary current is compensated by the two current, the total flux density is not big, and the two winding potential is not big. When the current transformer opens, the impedance Z2 increases infinitely, the two winding current equals zero, and the magnetizing force of the two winding equal