管螺纹标注含义.docVIP

管螺纹标注含义 Inch pipe thread from imperial wyeth, wyeth threaded pipe series and wyeth thread type combination to establish the basic size of inch pipe thread. 1/16 taper, wyeth threaded radial diameter tolerance into the imperial seal pipe thread on the number of axial tooth tolerance (there is a certain amount of repair and adjustment). Then follow the imperial seal pipe thread tolerance value put forward inch of sealing pipe thread tolerance (tolerance by one-way into one-way distribution, loosen the top diameter tolerance, let go of the bottom diameter tolerance). Seal pipe thread (R) The basic dimensions and tolerances of the sealed tube thread Fit mode There are two ways of sealing pipe thread: the inner thread of the cylinder is combined with the outer thread of the cone. The inner screw of the cone is conformed to the cone/cone. European countries mainly use pillar/cone to match threads; However, there is a certain difference between the two kinds of thread test gauges. The current ISO - inch seal thread gauge standard (ISO 7-2:20) is designed according to the column/cone coordinate system. tag The complete marking of the seal pipe thread is composed of thread character code, thread size code and rotation code. The characteristics of the screw thread in the imperial seal cylinder are: RP; The characteristic code of the internal screw thread is: RC; The characteristic code of the outer thread of the British sealing cone is: R1 (in conjunction with the British seal cylinder); R2 (in conjunction with the British seal conical screw thread); The rotation of the left screw is called LH; The rotation of the right screw is omitted. For sealing pipe threads, RP/R1, RC/R2 respectively represent column/cone and cone/cone thread pair. Unsealed pipe threads The basic size and limit deviation of the non-sealed tube Tags: The complete marking of the English non-sealing pipe thread is made up of the code name of the thread, the size code of the thread, the code of the middle di