双齿涡旋压缩机排气口开设及排气特性研究.pdfVIP

压缩机技术 2008年第1期(总207期) 文章编号：1006—2971(2008)0l-0004-04 双齿涡旋压缩机排气口开设及排气特性研究 王 君 ．苗 灵 霞 (1．中国石油大学机电工程学院，山东东营257061；2．黄淮学院电子科学与工程系，河南驻马店463000) 摘 要：研究了双涡旋齿涡旋压缩机排气口的开设，完善了排气口的开设原则，确定了双涡旋齿全啮合 齿形和非全啮合齿形的排气口理论开设区域和可用开设形状，分析了双涡旋齿涡旋压缩机排气过程中 排气腔容积、排气口开启面积和排气口气速等参数的变化规律。结果表明：与单涡旋齿相比，双涡旋齿 排气口形状更为复杂但呈中心对称，而且在排气过程中排气口气速波动变化小。 关键词：涡旋压缩机；双涡旋齿；排气口；排气特性 中图分类号：TH45 文献标识码：A Design of Discharge Port and the Characteristics of Discharging for Twin—wrap Scroll Compressor WANG Jun ．MIAO Ling—xia (1．College ofMachineryand Electronic Engineering，China University ofPetroleum，Dongying，257061，China； ． 2．Department of Electronic Science ofEngineering，College ofHuanghuai，Zhumadian，463000，China) Abstract：The design of discharge port for twin—wrap scroll compressor is studied，the principle of designing dis— charge port is improved，the theoretical regions and the usable shape of discharge port for whole meshing wrap and part meshing wrap of twin—wrap are determined，and the variation law of discharge chamber volume，dis— charge port’S working area as well as gas velocity in discharging process for twin—wrap scroll compressor are an— alyzed．The study results show that the shape of twin—wrap’S discharge port is complicated and symmetrical，and the gas velocity in discharging process for twin—wrap is steadier than the single wrap’S discharge port． Key words：scroll compressor；twin—wrap；discharge port；characteristics of discharging O 前言 本文讨论了双涡旋齿排气口的开设，并完善了 排气口的开设原则，确定了双涡旋齿的排气口开设 在涡旋压缩机理论和工程的设计