电容十说（Capacitor ten says）.docVIP

电容十说（Capacitor ten says） Ten say capacitor One of the capacitors: the role of capacitance As a passive component of the capacitor, its role is nothing more than the following: 1 、 apply to the power circuit to realize the function of bypass, decoupling, filtering and energy storage. The following categories are detailed: 1) bypass The bypass capacitor is an energy storage device that provides energy for the local device, which allows the output of the regulator to be homogenized, Reduce load demand. Like a small rechargeable battery, the bypass capacitor can be charged and moved into the device Line discharge. To minimize impedance, the bypass capacitor should be as close as possible to the power supply pin and ground of the load device Pin. This prevents the ground potential rise and noise caused by excessive input values. A ground bomb is a ground link The voltage drop at the current through the burr. 2) to lotus root Lotus root, also known as lotus root. From the circuit, it can always be divided into the drive source and the driven load. If the load capacitance is relatively large, the driver circuit should charge and discharge the capacitor to complete the signal jump, When the rising edge is steep, the current is so large that the current that drives it absorbs large amounts of power The current, due to inductance in the circuit, the resistance (especially inductance on the pin of the chip, will bounce) The current is actually a noise relative to the normal condition, which affects the normal work of the front Its called coupling. To play the role of a battery to meet the drive circuit changes in the current, to avoid phase Mutual coupling interference. Combining the bypass capacitor with the decoupling capacitor will make it easier to understand. Bypass capacitor is actually go to the coupling However, the bypass capacitor usually refers to the high frequency bypass, that is to say, a low impedance is added to the high frequency switching noise Leakage preven