常见硬件故障集合（Common hardware fault set）.docVIP

常见硬件故障集合（Common hardware fault set） Common hardware fault set A main board The motherboard is the key component of the entire computer and plays a vital role in the computer. If the motherboard fails, it will affect the work of the entire PC system. Here, lets take a look at the motherboard in the process of using the most common failures are what?. Common faults: boot no display Computer boot does not show, the first thing we need to check is BIOS. The motherboard BIOS hardware store important data, compare the vulnerable part of BIOS at the same time, the motherboard, easily damaged, if damaged will cause the system to run, such failure is usually because the motherboard BIOS damage caused by CIH virus (of course, does not rule out the main board fault cause the system to run.). General BIOS virus after the destruction of the data in the hard disk will be lost, so we can detect the hard disk data is intact to determine whether BIOS is damaged, if the hard disk data intact, then there are three reasons why boot no display phenomenon: 1., because the motherboard expansion slot or expansion card has problems, resulting in plug in such as sound cards and other expansion cards, the motherboard did not respond without display. 2. exempts the jumper motherboard, in CMOS sets CPU frequency not to be possible, also possibly causes not to display the fault, this, as long as clears CMOS to be possible to solve. Clear CMOS jumper in the vicinity of the general board of the lithium battery, the default location is generally 1, 2 short, as long as the jump was 2, 3 seconds short circuit can solve the problem for the jumper can not find the old motherboard if the user, as long as the battery removed, to boot into the CMOS display after setting off, the battery up to discharge CMOS purposes. 3., the motherboard can not recognize memory, memory corruption, or memory mismatches, will also lead to no display of the fault. Some of the old motherboard is more critical memory, once ins