2.0 Active Filter Configuration - pqmonitoring（2.0有源滤波器配置pqmonitoring）.PDF

ACTIVE FILTER DESIGN AND SPECIFICATION FOR CONTROL OF HARMONICS IN INDUSTRIAL AND COMMERCIAL FACILITIES Mark McGranaghan Electrotek Concepts, Inc. Knoxville TN, USA can be less than a conquerable passive filter for Abstract the same nonlinear load and the active filter will Active filters have become a viable alternative not introduce system resonances that can move a for controlling harmonic levels in industrial and harmonic problem from one frequency to commercial facilities. However, there are many another. different filter configurations that can be employed and there is no standard method for The active filter concept uses power electronics rating the active filters. This paper describes to produce harmonic components which cancel the active filter operation characteristics and the harmonic components from the nonlinear develops standard ratings that can be used for loads. These active filters are relatively new and filtering different types of nonlinear loads. a number of different topologies are being Limitations of the active filters are also proposed [6-10]. Within each topology, there described. are issues of required component ratings and methods of rating the o