N O V A J E T 写 真 机 常 见 问 题（So N O V A J E T write the real machine）.docVIP

N O V A J E T 写 真 机 常 见 问 题（So N O V A J E T write the real machine） So N O V A J E T write the real machine Dislocation: A. fault phenomenon: left and right dislocation is greater than 0.5 cm and the partition is misaligned. The resistance of the motor is too high. Can check belt, pulley, copper sleeve, slip surface paste, grating, ensure that no problem can be solved, change the motor. B. Malfunction: left and right dislocation is less than 0.5cm and continuously misplace. Copper sleeve resistance is too large, can clean copper sleeve, wipe the rod or reduce bracket speed. Still cannot solve, change copper sleeve C. Failure phenomenon: diagonally, parallelogram. Grating, decoder. Still cannot solve, check the grating if damaged, replace grating. D. Failure: there is a mixed color around the font. Calibrate the nozzle. 2. Mess code: A. malfunction: fixed A color with A color block. The sprinkler head has a problem, replace the sprinkler head. B. Failure phenomenon: there are color blocks on the whole picture. There is a problem with the data line or print line. Step 3: slow down: Failure: there is a pause in the drawing. Whether the operating system is MIN98, whether the external parallel printing port is ECP 4. No ink: A. failure phenomenon: single sprinkler head is not ink. After the cross - shift is cleaned, judge whether there is a problem with the contact zone. If it is not, it can be judged that it is burnt or blocked, and the words can be washed with hot water. If a color is fixed regularly, contact with the ink supplier to exchange ink. B. Failure phenomenon: all sprinkler heads are not ink jet, one of them has a problem and affects others. You can either clean it up one by one, or you can get a problem with the ink board. 5. Unable to print online: A. check whether the monty printer is set, and the port Settings are LPT1 B. Check the decryption card and whether the print line is normal. C. If all of the above are normal, it is not possible to print online.