混凝土工程规矩（Rules of concrete engineering）.doc

混凝土工程规矩（Rules of concrete engineering） This article is contributed by the return to the cloud Doc documents may have a poor browsing experience at the WAP end. It is recommended that you choose TXT, or download the source file to the native view. Rules for the management of concrete works In order to improve the quality of concrete component project level, to achieve concrete vibratory compaction, clear edges and corners in good article, line and the mouth of the cave, ground leveling, concrete surface without voids, pits and vibration, less vibration, cold seam wait for a phenomenon, meet water concrete standards. Do always there, always does, always someone responsible, always someone supervision, establish a set of operable management procedures, engineering rules are hereby formulated concrete engineering rules. A, the preparation of the concrete engineering 1. Ready-mixed concrete supply contracts signed a 1) the choice of basis: ready-mixed concrete mixing station selection focuses on the supply capacity of mixing station concrete mixing station, the workings of the mechanical equipment, and transport capacity, quality of the raw materials for the concrete, concrete test and quality control level, distance of concrete supply, coagulation soil test match after the technical indicators, the unit price of concrete and so on many factors. 2) the following technical quality guarantee conditions must be specified in the pre-mixed concrete supply contract: a. Quality assurance of concrete strength; B. Quality assurance of concrete condensation time and slump; C. Speed of supply of concrete; D. Guarantee of the quantity of concrete; E. the quality assurance requirements of the complete set of technical data for concrete; F. Requirements for cement, sand, stones, admixtures, concrete alkali content, anti-seepage, etc. 2. Pre-casting acceptance preparation 1); 2) pre-inspection and acceptance of template engineering; 3) approved by the supervision engineer. 4) concrete