桥梁施工（Bridge construction）.docVIP

桥梁施工（Bridge construction） Bridge construction. TXT marriage is keyboard, too many order and rules; Love is a mouse, a little. Men are more important than hosts; Women look like a monitor. Everything can be seen. DefAhtBie4Ksv4urPDi18l 1019736083 Bridge construction The lower structure 1. Construction process of bored pile Please fill in the written construction application report first, and then the supervision engineer will approve the project. The wire point is the reference point of the supervision engineer, and the infrared rangefinder is used to set the sample. After accurately releasing the pile into the protective tube, after the supervision engineer has checked the correct check, the pile position control pile is led out by the theodolite. The drill is intended to use a rotary drill. The drilling rig is installed first, the drill rig and lifting system are installed and the rig is adjusted. The position deviation of the drill pipe shall not be more than 2cm, and the rotary table should be checked in and out. If there is any inclination or displacement, adjust and correct it in time. The drilling mud site is prepared and stored in the mud pool. Check the aperture and perpendicularity in the drilling process and make a good drilling record. Clearance hole: after drilling depth meets the design requirements, notify the engineer to inspect the hole and immediately clear the hole. The clearance method is adopted. [6] put a reinforcing cage: reinforcing cage of reinforcement in accordance with the design drawing class at the scene of the centralized blanking forming, according to the required length is divided into 2-3 day, reinforcing cage welding firmly, hanging hole, main reinforcement, stirrups position accurately. The height deviation of the steel cage shall not be greater than or minus 5cm. The underwater concrete is used to mix the concrete, transport and deliver the concrete to the tube. The catheter is first installed before perfusion. When installing the