如何获取肉鸡（How to get the broiler）.doc

如何获取肉鸡（How to get the broiler） How to get the broiler Published in: corner category: unclassified Today we are going to talk about some simple invasions. This article is for beginners, and I cant write the difficult articles. The methods used here are both for winnt and 2000, and the platform is 2000. I just want to give it to the rookie. Theres so much verbose, now lets get started. First of all, what do we do with a few scanners? You dont know what the scanner is? I dizzy ~ ~ ~ scanner is scanning, it can detect the hole of host! There are often port scanners, cgi vulnerability scanners, and large scanners like streamers that can sweep everything. Lets start with the scanner principle! Now lets say youre A, and youre going to sweep B So, the process of usually setting up three shakes is A -- -- -- -- -- -- -- -- the Syn - -- -- -- -- -- - B A -- -- -- -- -- the Syn/Ack -- -- -- -- -- - B A -- -- -- -- -- -- -- -- -- -- -- -- -- -- an Ack - B This creates a connection, and the scan creates a lot of them to get to know which ports the other has opened, and which services will be further detected. However, this TCP scan will leave a lot of records, and if Bs network is not an idiot then hell start paying attention!! So were going to use a semi-open scan (syn) That is A -- -- -- -- -- -- -- -- the Syn - -- -- -- -- -- - B A -- -- -- -- -- the Syn/Ack -- -- -- -- -- - B A -- -- -- -- -- -- -- \ \ B A - connected --? -- -- -- -- -- B Thus, since B has not been confirmed, it will not record the IP, but if B is very bt, then he will also record the IP of any syn, so there is no way!! The principle of scanning is finished, now lets talk about several scanning tools!! Thats the point. Beginners dont care Thats the principle ~ ~ ~ lets start with the port scanner a port is the way to the system! So hes important!! I recommend superscan and nscan both foreign, superscan hanhua version of the problem, suggested to go to download the E version Nscan is in black and whit