底层配置、enable,等配置（Bottom configuration, enable, etc configuration）.docVIP

下载本文档

5
0
约3.21千字
约 7页
2017-08-04 发布于河南
举报
版权申诉

底层配置、enable,等配置（Bottom configuration, enable, etc configuration）.doc

1、本文档共7页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
5、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
6、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
7、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
8、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

底层配置、enable,等配置（Bottom configuration, enable, etc configuration） Telnet remote login, network equipment and requirements of the login login you can exchange PC. Serial serial port refers to the COM interface on the PC, and then through the console cable, Console interface to connect the network equipment configuration, debug logging equipment SSH Shell is a safe, secure remote login, to use SSH, we must first configure the public key and private key in the login, domain name and other parameters, can be used. Interface physical state protocol state After the admin down down equipment factory default state Up down no shutdown, the protocol state is not normal, please check on the router and the router IP address is in the same network, the routing interface is open, two layer encapsulation interface consistency, After down down is no shutdown, but both ends of the clock frequency configuration, physical interface state has not changed to UP, so the agreement is down Up up interface physical state and protocol state is normal, the equipment can send and receive data packets The first step: the underlying router configuration Routerenable Router#configure terminal Router (config) #no IP domain-lookup Router (config) #line console 0 Router (config-line) #no exec-timeout Router (config-line) #logg syn Router (config-line) #hostname R1 R1 (config) #end The second step: the selection and configuration of IP address configuration interface, clock frequency and IP address R1#show IP interface Brief Interface IP-Address OK Method Status Protocol? Ethernet0 unassigned YES unset administratively down down Serial0 unassigned YES unset administratively down down Serial1 unassigned YES unset administratively down down TokenRing0 unassigned YES unset administratively down down R1#show controllers serial 0 HD unit 0, IDB = 0xBC030, driver structure at 0xC14A0 Buffer size 1524 HD unit 0, V.35 DCE cable The third step: R1#conf t R1 (config) #interface serial 0 R1 (config-if) #ip addre