建筑钢材（structural steel）.docVIP

建筑钢材（structural steel） Civil engineering materials problem set The seventh chapter of construction steel Glossary The yield ratio of steel Elongation Section shrinkage The performance of cold-formed steel The impact toughness of the steel Prescription Aging sensitivity The hardness of steel The fatigue damage of steel fatigue limit Cold working steel reinforcement Heat treatment of steel Carbon structural steel Q235AZ Q235C Q215Bb Q215AF High strength low alloy structural steel Q345B Rimming steel Killed steel Semi killed steel Special steel Hot rolled low carbon steel wire rods Hot rolled ribbed steel reinforced concrete cold rolled ribbed steel bar Heat treated steel bar for prestressed concrete Steel wire for prestressed concrete prestressed concrete steel wire strand Section steel Hot rolled steel Cold-formed steel steel plate Pressure plate pig iron Open hearth steel Oxygen converter steel The air of converter steel Electric steel Cold brittleness The critical temperature of brittleness Brandts strength Fatigue Alpha iron V iron Delta iron Point defect Line defect Surface defects dislocation Ferrite pearlite Cementite Eutectoid steel Cold hardening Cold drawing Cold drawing Artificial aging Natural aging Quench tempering annealing normalizing The electrochemical corrosion of steel 16MnNb 40Si2MnV To determine the problem (of the tick, wrong row *) The yield of steel ratio increases, the higher the degree of the safe use of said structure. Carbon structural steel grades is bigger, its strength is high, the worse the plastic. The steel structure design, the structure directly under the dynamic load should be used in boiling steel. The cold area should try to use high brittleness transition temperature of steel construction. The construction of steel concrete strength was higher than. Q235 is the most commonly used building steel grades. According to the construction of steel yield point and tensile strength to determine the grade. The yield point of construction