lunwen（论文）.docVIP

lunwen（论文） 1页 第1期机电元件vol27nn1 2007年3月电子匮chaniialcoⅡ0nenis mal20o7。 一种简单实用的铣工夹具的运用 党喜龙 （郑州航天电子技术有限公司，河南驻马店463003） 摘要：主要介绍了电连接器矩形壳体在批生产中铣工夹具的利用，并对该铣工夹具的结构进行了剖析。通 过批生产验证，证明了该铣工夹具的可行性，不仅保证了零件的加工精度，而且大大提高了生产效率。 关键词：矩形壳体；铣工夹具；生产效率 中图分类号：tg751.3文献标识码：B文章编号：1000-6133（2007）一0039-02 OI 1引言 矩形电连接器应用比较广泛，许多重点航天型生产的瓶颈，原加工方法不能满足日益增长的需求， 号普遍采用这种电连接器。矩形电连接器是我公司且加工精度不易保证，因此有必要改进加工流程。 收稿日期：2006一II一23 主轴箱央管不锈钢护套求后，再将尾座定位，使工装移动到合适的位置后受 ]＼厂／ 到阻挡而不能继续向前移动，这样即可进行批量生 ＼堡动／产了。 不锈钢护套端部成形后相当于经过了局部固溶 一一 处理，在自然冷却过程中会产生一定的内应力，使零 ／件发生轻微变形或使弯曲处产生裂纹因此，应及。 时对零件进行去应力退火处理。 5结束语 3轴向进给成形工艺系统图 不锈钢护套端部旋压成形工艺具有操作简单、 用车床导轨保证工件与工装同轴。当零件与工装都 成形快捷、尺寸公差小、无毛刺、表面光洁度高、应用 After fixing, you can carry out the tool setting, start the lathe, and select the spindle speed The forming process is practical and simple and has been successfully applied Select I300r / min, move the pusher axial feeding forming die, make the tooling and In the mass production of our stainless steel bushing, the forming quality is stable, The sheath is contacted at the end of the sheath to produce frictional heat, and severe friction causes the sheath end Reliable. At the same time, the method can be applied to other seamless steel The part temperature reaches about 1000 DEG C in about 1rain time The end of the thin-wall pipe of the pipe, the copper tube is formed, and various shapes can be realized The ends soften and become deformed along the die cavity; continue to move forward Forming. At this point, the metal at the end of the sheath has good plasticity: Under the action of forward thrust, the shape of the end of the sheath is gradually changed into the metal tube end friction thermal forming process with the mould [1] Wang Cunhai The shape of the cavity is consistent. When the parts to be machined are tested to conform to the drawings, [J]. new technology, new process, 20O6, (1):104 - 1o5. Page and 2 Electromechanical components, 2007 Five parts (our rectangular shell specifications are relatively small); and then 2, the original processi