ps图层模式（PS layer mode）.docVIP

ps图层模式（PS layer mode） Normal The normal mode is also the default mode. Do not mix any other layers. Dissolve Dissolution model. The pixel color produced by the dissolution mode originates from a random permutation value of the upper and lower mixed colors, which is related to the opacity of the pixel. Behind Back mode. Edit only the transparent area of the layer. This mode is valid only if the LockTransparentPixels (lock transparent area) of the layer is not checked. Clear Clear mode. Any editor will make pixels transparent. This pattern has nothing to do with the color of the brush, only with the parameters of the brush. The model of shape tools (when the FillPixel option is checked state), the paint bucket tool, the brush tool, the pencil tool, fill and stroke are effective command command. Darken Darkening mode. The color information of each channel and the pixel color of the mixture are investigated, and the darker ones are chosen as the result of the blending. The brighter pixels will be replaced by darker pixels, and the darker pixels will not change. Multiply Positive overlay mode. Examine the color information in each channel and overlay the underlying color. The principle and the color model of subtractive principle is the same. The colors produced by mixing like this are always darker than the original. If it happens with black, the bottom is black. Mixing with white does not affect the original color. ColorBurn Color enhancement mode. Darken the underlying color a bit like the bottom of a positive film, but the difference is that it increases the contrast at the bottom according to the color of the superimposed pixels. Mixed with white, no effect. LinearBurn Linear color deepening model. Similarly, it is similar to the bottom of a positive film. By lowering the brightness, the background color is dimmed to reflect the blend color. Mixed with white, no effect. Lighten Brighten mode. In contrast to the darkening mode, the pixel brightness of the mixed pixel