稀土永磁材料气流研磨流场模拟分析.PDF

稀土永磁材料氣流研磨流場模擬分析 A Simulation A nalysis of Jet Milling Flow Field for Grinding Rare Earth Magnet Material 1 1 1 1 C.M. Hung , N.K. Tang FLOW-3D In this study we u sed FLOW-3D commercial f luid dynamic software to simulate the f low field (NdFeB) in j et m ill processes. The f low fields w ith thr ee 3 different nozzle angles (180C, 170o and 120o) were 180° 170° 120° simu lat ed . Resu lt s showed th at when the nozzle 180° angel is 180 o, the flow fields are stable; other angles 2 caused unstable flow. Results also showed that the 180° velocity of the air at the outlet of the nozzle would 15mm 5mm reach 200m/s with only 0.8Mpa air pressure at the 0.8MPa inlet of the nozzle when the inlet diameter is 15mm 200m/s and nozzle tip diameter 5mm. 關鍵詞： Key words: rare earth materials , NdFeB, j et mill 一、研究內容 100mm 150/200 mm FLOW-3D 0.8MPa 200m/s 噴出口 100mm 150mm 10mm 200m/sec 噴入口 200m/sec 噴入口 FLOW- 200m/sec 噴入口夾角 180 度 3D 3D ( 1) 13D 1 1 Engineer, Casting technology section metal