Determining MOSFET Driver Needs for Motor （确定电动机MOSFET的驱动需求）.pdf

M AN898 Determining MOSFET Driver Needs for Motor Drive Applications Author: Jamie Dunn Microchip Technology Inc. INTRODUCTION Electronic motor control for various types of motors + Motor represents one of the main applications for MOSFET VSUPPLY drivers today. This application note discusses some of the fundamental concepts needed to obtain the proper - MOSFET driver for your application. The bridging element between the motor and MOSFET driver is normally in the form of a power transistor. This can be a bipolar transistor, MOSFET or an Insulated FIGURE 2: Drive Configuration for a DC Gate Bipolar Transistor (IGBT). In some small Brushless Motor. Brushless DC motor or stepper motor applications, the MOSFET driver can be used to directly drive the motor. For this application note, though, we are going to assume that a little more voltage and power capability is needed than what the MOSFET drivers can handle. The purpose of motor speed control is to control the speed, direction of rotation or position of the motor Motor + shaft. This requires that the voltage applied to the motor is modulated in some manner. This is where the VSUPPLY power-switching element (bipolar transistor, MOSFET, - IGBT) is used. By turning