Design of gear cutting fixture for CNC gear （设计数控齿轮的齿轮加工夹具）.pdf

International Journal of Scientific and Research Publications, Volume 2, Issue 9, September 2012 1 ISSN 2250-3153 Design of Gear Cutting Fixture for CNC Gear Hobbing Machine K.V.S. Seshendra Kumar Department of Industrial Production Engineering, GITAM Institute of Technology, Gitam University, Visakhapatnam-530045, India Abstract - The present work deals with the design of Gear and Watanabe [7] have shown five-axis control collision free tool Fixtures for L200 and H250 CNC Gear Hobbing Machines. The path and post processing for NCdata. In the work of [8], the task on hand was to design fixture for the components, namely authors present an experimental semi study of the vibratory Reduction ideal gear and 4t1i and 3rd speed gear for gear box behavior of the cutting tool golds of the operation of slide- used in HMT Tractors. Fixture design and selection starts with lathing, is the object to show that it is possible to consider the the component and the manufacturing operation to be performed. roughness average of the part machined starting from The criteria for this design process are accuracy, positive displacement resulting from the nozzle of the tool. In the work of location, repeatability, production rate and importantly, the [9] a study was presented on the influence of the position of the reliability under the action of the cutting force and shear cutting tool on dynamic behavior in milling of thin walls, and in expe