DPA inj pump Fuji Yachts（DPA inj泵富士游艇）.pdf

Section Ca.6 DESCRIPTION OF THE FUEL INJECTION PUMP The injection pump is a single-cylinder, opposed- plunger, inlet-metering, distributor-type pump fitted with a mechanical flyweight-type governor and a hydrau- lically operated automatic advance mechanism. The pump is flange-mounted on the rear of the engine front mounting plate and is driven by the timing chain. A splined quill shaft, having a master spline at each end Fig. Ca.l Mainfuel filter air bleedpoints 1 . Fuel cut-off tap. 2. Blanking plug. 3. Union screw. Taxi. Issue 2. 55430 THE FUEL SYSTEM (Distributor-type Injection Pump) Ca close fit, in the stationary hydraulic head. The pumping section of the rotor has a transverse bore containing twin opposed pumping plungers. These plungers are operated by means of a cam ring, carried in the pump housing, through rollers and shoes which slide in the rotor. The cam ring has four internal lobes operating in diagonally opposite pairs. The opposed plungers have