非正弦磁场测量系统的原理与设计 principle and design of measuring system for non-sinusoidal magnetic field.pdfVIP

非正弦磁场测量系统的原理与设计 邱望标，陈清伟，胡鹏飞 (贵州大学机械工程学院，贵州贵阳550003) 摘要：由于商用型高新计测量时是将信号默认为正弦波信号来处理的，当测量信号是尖脉冲、问隙梯形 波等信号泺时，测得的磁场值将会严重失真，造成测量数据不准确。以89S52单片机作为控制核心，以霍尔器 件A1323作为磁场传感器，利用真有效值转换器AD637将非正弦波电压信号转换成正弦波电压信号，通过模· 数转换嚣ADC0809，利用单片机将测得的电压值转换成磁场强度的数值，并将霍尔探头定标后把测得的磁场强 度值显示在液晶LCDl602上，经过验证及实际使用效果良好。 关键词：非正弦磁场；真有效值；霍尔元件；测量 中图分类号：TM936．2 文献标识码；A 文章编号：1001．3830(2012)05—0052—03 and of fornon-sinusoidalfield Principledesignmeasuringsystem magnetic QIUWang-biao，CHENQing—wei，HUPeng·fei 550003，China CollegeofMechanicalEngineering,GuhouUniversity,Guiyang Abstract：For available defaultitdealswithsinusoidalthe source commerciallyGaussmetre．by signal．IfsignaI be iS andclearance waveandSOon．a distortedmeasurementvalueof fieldwill sharppulse trapezoid seriously magnetic ininaccuratemeasurement 89S52 ascontrolcore．andAl323 0bmined,resulting data+Choosingsinglechipcomputer Halldeviceas field RMSAD637toconvertnon．sinusoidaltosinusoidalwave magneticsensor,using voltage voltage fornon-sinusoidalfieldwas eonverter ADC0809，the signal，ameasuringsystem constructed．Usinganalog-digitat measuredisconvertedtovalueof field and LCDl602． voltage magnetics仃engthbysinglechipcomputerdisplayedby be ItiS thatbetter resultsCall obtained． proved measuring words：non-sinusoidal RMS：Hall measurement Key magneticf