基于ansys的高速斥力机构的分析与实验 analysis and experiment of high-speed repulsion driver based on ansys.pdfVIP

40 电气开关(2006. .4) NO 文章编号,1004 289 (2006)04-0040-05 X 基于ANSYS的高速斥力机构的分析与实验 1 1 2 1 李博 董恩源 李晓玮 邹积岩 (1.大连理工大学电气工程与应用电子技术系 大连 116023;2.沈阳师范大学物理科学技术 学院 沈阳 110034) 摘 要 电磁斥力机构是利用涡流原理制作的一种新型快速操动机构 由于受力金属盘的激励源频率是随一个时, 间变化的量 使用普通方法建模难于对斥力机构进行全面分析 本文用有限元分析软件 O ANSYS对高速斥力机构 进行了分析 通过的对整个斥力机构的各种参数进行分析和寻优 找到了如何提高斥力机构工作参数的基本规 律 并通过实验进行了速度测试 分析结果对于使用涡流斥力机构进行大负载高压开关操动提供了设计指导 O O 关键词,ANSYS;涡流 斥力机构; 中图分类号, 15 文献标识码, TM B - Analysis and Experiment Of ~igh speed RepulsiOn Driver Based On Ansys - - - - L1 BO DONG En yuan L1 XiaO wei ZOU i yan (1.Dep Of Electrical and ElectrOnics Engineering Dalian University Of TechnOlOgy Dalian. 116023 China; 2. Physical Science and TechnOlOgy Institute Shenyang Teacher s NOrmal University Shenyang 110034 China) Abstract,ElectrOmagnetic repulsiOn driver is a new sOrt Of fast actuatOr which is manufactured by eddy current principle It is hard tO carry Out Overall analysis tO repulsiOn driver using Ordinary methOd because the. freguency Of the driving sOurce Of the metal plate is a variable alOng with the time The finite element analysis. sOftware ANSYSis adOpted tO analyze the repulsiOn driver in this paper and sOme fundamental laws abOut hOw tO imprOve the repulsiOn fOrce are fOund Out by analyzing and Optimizing the parameters Of the driver SOme. experiments are dOne tO verify the analysis results which have a gOOd significance tO the designatiOn Of the - . repulsiOn driver tO