APPENdIX A TyPICAL SPECIFICATION FOr （附录的典型规范）.pdf

APPENdIX A TyPICAL SPECIFICATION FOr STEAM SUrFACE CONdENSErS A1.0 GENErAL COMMENTS a 1.1 This Appendix is intended solely as a guide 3. The accessories to be included are adequate to to assist in writing specifications for steam surface meet the requirements of service for which the condensers. It is for the convenience of Purchasers unit is specified who wish to incorporate parts or all of it in their own 4. The highest degree of safety in operation and specifications. continuity of service is obtained a 1.2 In the procurement of condensers, it is very a 1.3 The design and construction of air removal important that the Purchaser set forth the conditions equipment shall conform to the latest Heat Exchange to be met by the unit so that: Institute Standards for Steam Jet Vacuum Systems and Performance Standards for Liquid ring Vacuum 1. The equipment is of the proper capacity, type, and Pumps. quality to perform successfully the functions for which it is specified a 1.4 The design capacity of air removal equipment 2. The performance characteristics are proper to shall conform to the latest Heat Exchange Institute meet the Purchaser’s specific service conditions Standards for Steam Surface Condensers. A2.0 CONdENSEr dESCrIPTION a2.1 type and arrangement – The condenser for