Corrosion analysis and models for some （腐蚀分析和模型对一些）.pdfVIP

Issue 1, Volume 2, 2008 35 Corrosion analysis and models for some composites behavior in saline media Alina Barbulescu and Lucica Orac account of their anticorrosive properties. [2] - [3] Abstract— Corrosion is one of the main causes of metals degradation, which consists of superficial and structural changes. It In this study we focused on the analysis of some composite causes damages and economic loss and can be prevented mainly by materials, in saline media and in cavitation field. choosing the materials with the best properties for the working The base material was obtained by 87 % Cu, 7% Sn, 4% conditions. When a material is introduced in an aqueous medium, an Zn, 2% Pb powder (sample 1). These powders were sintering electrochemical attack is produced. It can be combined with other with graphite in different proportions (the samples 3 and 5) effects, as, for example, that of cavitation. and half of them were oil - impregnated at high temperature In this context, we present the results of our corrosion experiments (the samples 2, 4 and 6). The graphite’s percentage is on some composites materials (simple and oil - impregnated) presented in Table I. introduced in saline water and in a cavitation field produced by ultrasounds, in an experimental set - up especially build for this Table I. Composite’ s graphi