机械英文名词C(英汉).docVIP

机械设计英文名词C 按英文名词字母排序 abrasion, abrasive wear 磨料磨损 active force, applied force 作用力 actual size 实际尺寸 addenddum angle 齿顶角 addendum 齿顶高 addendum modification 径向变位 addendum modification (for external gears) 径向变位量 addendum modification coefficient 径向变位系数 additive 添加剂 adhesion wear 黏着磨损 adjusted rating life 修正额定寿命 aerodynamic bearing 气体静压滑动轴承 air spring 空气弹簧 angle drive 角度传动 angle of contact 包角 angle of transmission 作用角 angular bevel gear 斜交锥齿轮 angular contact bearing 角接触推力轴承 angular contact bearing 角接触轴承 anti-friction bearing material 减磨轴承材料 approach, engaging-in 啮入 archimedes spiral 阿基米德螺线 attitude angle 偏位角 auto-controlled clutch 自控离合器 axial load factor 轴向载荷系数 axial modification 齿向修形 axial module 轴向模数 axial pitch 轴向齿距 axial plane 轴平面 axial plane of wormwheel 蜗轮轴平面 axial profile 轴向齿廓 back cone 背锥面 back cone angle 背锥角 back cone distance 中点锥距 back cone tooth profile 背锥齿廓 back to back arrangement (rolling bearing) 背对背配置（滚动轴承） balancing mass 平衡质量 ball oscillating teeth 滚珠活齿 ball screw 滚珠丝杠 ball screw 滚珠丝杠 ball bearing 球轴承 band brake 带式制动器 base circle 基圆 base helix 基圆螺旋线 base tangent length 公法线长度 basic profile 基本牙型 basic rack 基本齿条 basic rack tooth profile 基本齿廓 basic rating life 基本额定寿命 basic size 基本尺寸 bath lubrication 油浴润滑 bathtub curve 浴盆曲线 bearing 轴承 bearing axial load 轴承轴向载荷 bearing bore diameter 轴承内径 bearing bush 轴套 Bearing characteristic number 轴承特性系数 bearing liner 轴承衬 bearing load carrying capacity 轴承承载能力 bearing mean specific load 轴承压强 bearing outside diameter 轴承外径 bearing radial load 轴承径向载荷 bearing ring 轴承套圈 bearing series (rolling bearing) 轴承系列（滚动轴承） bearing width 轴承宽度 bearing with solid lubricant 固体润滑滑动轴承 belleville spring 碟形弹簧 belt drive 带传动 belt length 带长 bending vibration 弯曲振动 bevel gear 锥齿轮 bevel gear with axes at right angles 正交锥齿轮 bevel gear with circular arc tooth prof