地大《建筑结构抗震设计原理》在线作业一（The principle of seismic design of architectural structures is one）.docVIP

地大《建筑结构抗震设计原理》在线作业一（The principle of seismic design of architectural structures is one） The principle of seismic design of architectural structures is one Total score: 100 test time: -- Single topic selection Multiple choice (20 questions in total, 80 points.) 1. According to a large number of data analysis, China has a 10 percent chance of surpassing the design base period in 50 years (). A. more intensity B. Basic intensity C. encounter intensity D. crowd values Full marks: 4 points 2. In urban planning, urban construction should consider earthquake prevention measures when the city is in an earthquake zone (). A. Six degrees and above B. Above and above level 6 C. Seven degrees and above D. Seven and above Full marks: 4 points 3. The advantage and disadvantage, danger area considering the factors are: Ⅰ. Geological; Ⅱ. Terrain; Ⅲ. Landscape; Ⅳ. The field layer thickness; Ⅴ. The importance of building; Ⅵ. Basic types, of which the right (). A. Ⅰ, Ⅱ, Ⅲ B. Ⅳ, Ⅴ, Ⅵ C. Ⅰ, Ⅳ, Ⅴ D. Ⅱ, Ⅴ, Ⅵ Full marks: 4 points 4. The basic seismic acceleration of the design of a region is 0.15g. For the earthquake-resistant design of the class c buildings in this area, the following statement is correct (). A. According to the requirements of 8 degrees, seismic design is carried out, and anti-seismic measures are adopted at 7 degrees B. Aseismatic design (including calculation and seismic construction measures) is performed at 7 degrees. C. Seismic calculation is carried out at 7 degrees and anti-seismic measures are adopted at 8 degrees D. The seismic calculation is performed at 7 degrees and the structural measures can be reduced appropriately Full marks: 4 points 5. In order to improve the ductility of the end of the frame column and the beam column in the earthquake, the length of the column end stirrup area should be taken (). A. No less than 1500mm and long side dimensions of column section B. Not less than the length of the column, 1/6 of the column and the minimum of 1000mm C. N