条形码扫描技术（bar coding and scanning）.docVIP

条形码扫描技术（bar coding and scanning） A barcode reader is an electronic device that read printed barcode. Like a scanner, which comprises a light source, a lens and a light sensor to light into electrical impulses. In addition, the output port of the bar code reader contains almost all barcode image decoder circuit analysis of data provided by the sensors and send the barcode the contents of the scanner. Bar code scanning requires scanners, scanners use their own light source to illuminate bar codes, and then use photoelectric converters to receive reflected light, converting the light and dark of the reflected light into digital signals. No matter what rules are adopted, the printed bar code is composed of the static area, the starting character, the data character and the terminating character. Some bars have check characters between the data characters and the terminated characters. The quiet zone: the quiet zone is also called the blank area, divided into left and right blank blank area, left blank area is to do scanning scanning equipment ready, right blank area is to ensure the end tag recognition of barcode scanning equipment. In order to prevent the left blank area (dead zone) in the typesetting and printing was inadvertently occupied, can print a symbol in the blank area (left no digital printing , there is no digital print number) this symbol is called the quiet zone marking. The main role is to prevent the width of the quiet zone is not enough. As long as the width of the static area can be guaranteed, whether or not this symbol does not affect the bar code identification. The starting character: the first character, with a special structure, when the scanner read the characters, began to formally read code. The main contents of the bar code data character. - check character: test the read data is correct. Different encoding rules may have different check rules. The termination character: the last one character, as with a special structure, to inform code sca