网线交叉线接法（Cross connection of network cable）.doc

网线交叉线接法（Cross connection of network cable） No, the dual line is not the same as the usual one. The line is usually called straight line, and the double computer network is called cross line Line order of two computers interconnection line: A head with 568A - white, green, green, white, orange, blue, white, blue, orange, white, brown, brown Another head of 568B - white, orange, orange, white, green, blue, white, blue, green, white, brown, brown What this is done is double computer interconnection line {LAN is to use a single computer or terminal to connect with each other, and to exchange information according to certain protocols, so as to realize the sharing of resources. Commonly used network cable: twisted pair, coaxial cable, optical fiber and so on. Twisted pair can according to whether external shielding layer of metal mesh is divided into sets of shielded twisted pair (STP) and unshielded twisted pair (UTP). Starting from the cost and maintenance, most LANs use unshielded twisted pair UTP and UnshieldedTwistedPair as the transmission medium to the wiring network. The UTP cable is made up of a pair of twisted pair lengths and RJ45 crystal heads. The twisted pair is composed of 8 different colors on the line into 4 pairs twisted twisted together, the effect of as much as possible to reduce the electromagnetic radiation and external electromagnetic interference. In EIA / TIA568 standard, according to the electrical characteristics of the twisted pair line is divided into three classes, four classes, five lines. The most commonly used in the network are three lines and five lines. There are more than six kinds of lines at present. Good network cable to RJ45 crystal head access network card or HUB and other network devices RJ45 socket. Accordingly, the RJ45 plug seat is classified into three or five types of electrical characteristics. RJ45 crystal head made of sheet metal and plastic. The front end of the connector cable making crystal RJ-45 heads needed with 8 g