网线中的超5类线和6类线有什么区别（In the wire 5 lines and 6 lines of what is the difference）.doc

网线中的超5类线和6类线有什么区别（In the wire 5 lines and 6 lines of what is the difference） What are the differences between the 5 lines and the 6 lines in the network cable? Class line is mainly for the 100M network, of course, the 10M network is more than enough, the way it works is basically half duplex mode, the 5 lines of the most mature standards, but also the mainstream of todays market. Later, when developing Gigabit Ethernet, it was intended to run on 5 types of twisted pairs. But people found in the actual operation, the original 5 kinds of wiring products may have information about 30% points but the electrical performance test in support of Gigabit Ethernet Applications, namely 5 types of cable not all can run Gigabit Ethernet, mainly reflected in the electrical performance meets the need of 4 Gigabit Ethernet core full duplex transmission from the requirements of full duplex transmission of information, in the four core cable, different combinations of each pair of cables and cable, the technical specification of NEXT index shall comply with the provisions of the 5 kinds of cables, each line to support 100MHz bandwidth, 4 of total available bandwidth with 400MHz core, design and operation band Gigabit Ethernet is 400MHz. A twisted pair work in line with the existing 5 standards requires only two pairs of wires with 100MHz available bandwidth in half duplex. Therefore, many manufacturers have 5 kinds of products can run Gigabit Ethernet as enhanced (Enhanced Cat 5, 5E) to the market, the United States TIA/EIA 568A-5 5E standard, 5E, also known as the Super 5, this is the origin of 5E. Later, the emergence of 6 categories, over 6 categories, and even some recently proposed 7 categories, mainly related to the development of computer networks. Moores law calculation, computer network information needs will increase 1 times every 18 months, the development of the computer network to Gigabit Ethernet, the integrated wiring system presents 4 Application of twisted pair duple